Typical Duties of Welding Inspector After welding

Duties after welding:
Check:

1. Weld Identification

Each weld is marked with the welder's identification and is identified in accordance with drawing/weld map.


2. Weld appearance

• Ensure welds are suitable for all NDT (profile, cleanness, etc).
• Visually inspect welds and sentence in accordance with Code.


3. Dimensional survey

Check dimensions are in accordance with drawing/Code.


4. Drawings

Ensure any modifications are included on as-built drawings.


5. NDT

Ensure all NDT is complete and reports are available for records.


6. Repairs

Monitor in accordance with the procedure.


7. PWHT (if required)

Monitor for compliance with procedure (check chart record).


8. Pressure/load test (if required)

• Ensure test equipment is calibrated.
• Monitor test to ensure compliance with procedure/Code.
• Ensure reports/records are available.


9. Documentation records

Ensure all reports/records are completed and collated as required.